Netgear WNR3500L 사용자 설명서

Troubleshooting

8-10

Under Content Filtering in the main menu, select E-mail to display a screen that shows the current 
date and time of day. The WNR3500L router uses the Network Time Protocol (NTP) to obtain the 
current time from one of several network time servers on the Internet. Each entry in the log is 
stamped with the date and time of day. Problems with the date and time function can include the 
following:

•

Date shown is January 1, 2000.
Cause: The router has not yet successfully reached a network time server. Check that your 
Internet access settings are correct. If you have just completed configuring the router, wait at 
least 5 minutes, and check the date and time again.

•

Time is off by one hour. 
Cause: The router does not adjust for daylight savings time. In the E-mail screen, select the 
Adjust for Daylight Savings Time check box.

The first steps in solving wireless connection problems are these:

1. Using your wireless card’s setup utility program, make sure that your wireless card can find 

your wireless router.

2. Configure and test with the simplest wireless connection possible, and then add security.

The topics in this section describe these steps.

When you install a NETGEAR wireless card in your computer, a Smart Wizard utility program is 
installed that can provide helpful information about your wireless network. You can find this 
program in your Windows Program menu or as an icon in your system tray. Other wireless card 
manufacturers might include a similar program. 

If you have no specific wireless card setup program installed, you can use the basic setup utility in 
Windows by following these steps:

1. Open the Windows Control Panel, and double-click Network Connections.

2. In the LAN section, double-click Wireless Network Connection.