Netgear WNR3500L 사용자 설명서

Safeguarding Your Network

2-14

If you have a wireless network with both WPS-capable clients and non-WPS-capable clients, you 
should set up your wireless network manually. Then, use Push ‘N’ Connect (WPS) to quickly and 
easily add additional WPS-capable clients.

First, you must set up your wireless network manually (see 

To add a wireless client device that is WPS-enabled:

1. Log in to the wireless router at its default LAN address of http://www.routerlogin.net with 

its default user name of admin and default password of password, or using whatever LAN 
address and password you have set up.

2. On the wireless router main menu, select Add a WPS Client (computers that will connect 

wirelessly to the wireless router are clients), and then click Next. The Add WPS Client screen 
displays.

3. By default, the WPS button is selected. Either click the onscreen button, or press the WPS 

button on the side of the wireless router.

The wireless router tries to communicate with the client for 2 minutes.

4. Go to the client wireless computer, and run a WPS configuration utility. Follow the utility’s 

instructions to click a WPS button.

5. Go back to the wireless router screen to check for a message. The wireless router WPS screen 

will display a message confirming that the client was added to the wireless network.

To view a list of all devices connected to your wireless router (including wireless and Ethernet-
connected), see 

To connect a non-WPS enabled client to the wireless router:

1. On the device you want to connect to the router, open the networking utility. 

Note: Your wireless settings remain the same when you add another WPS-enabled client, 

as long as the Keep Existing Wireless Settings checkbox is selected in the 
Advanced Wireless screen (listed under the Advanced heading in the wireless 
router main menu). If you clear this checkbox, when you add the client, a new 
SSID and passphrase will be generated, and all existing connected wireless clients 
will be disassociated and disconnected from the wireless router.