Netgear WNDR3800 사용자 설명서

Select Advanced > Advanced Setup > Wireless Repeating Function to display the 

Wireless Repeating Function screen.

In the Wireless Repeating Function screen (depending on the frequency you want to use), 

select the Enable Wireless Repeating Function check box and select the Wireless Base 
Station

 radio button.

Enter the MAC address for one or more repeater units.

Click Apply to save your changes.

Set Up a Repeater Unit

Use a wired Ethernet connection to set up the repeater unit to avoid conflicts with the wireless 
connection to the base station.

If you are using the WNDR3800 base station with a non-NETGEAR 

router as the repeater, you might need to change additional 
configuration settings. In particular, you should disable the DHCP 
server function on the wireless repeater

 

AP.



Log in to the router that will be the repeater. Select Basic > Wireless Settings and 

verify that the wireless settings match the base unit exactly. The wireless security option 

has to be set to WEP or None.

Select Advanced > Wireless Repeating Function, and select the Enable Wireless 
Repeating Function check box 

and the Wireless Repeater radio button.