Netgear WGR614v9 사용자 설명서

24

Help with Troubleshooting

If you cannot connect after several minutes, you might be using an incorrect service name, 
user name, or password. There also might be a provisioning problem with your ISP.

If your router can obtain an IP address but your computer is unable to load any Web pages from the 
Internet, check the following.

•

Your computer might not recognize any DNS server addresses. 

A DNS server is a host on the Internet that translates Internet names (such as www addresses) 
to numeric IP addresses. Typically your ISP provides the addresses of one or two DNS servers 
for your use. If you entered a DNS address when you configured the router, restart your 
computer. Alternatively, you can configure your computer manually with DNS addresses, as 
explained in the documentation for your computer.

•

Your computer might not have the router configured as its default gateway.

Restart the computer, and verify that the router address (192.168.1.1) is listed by your 
computer as the default gateway address.

Most computers and routers have a diagnostic utility called ping that sends an request to a target 
device. The device then replies. The ping utility makes it easy to troubleshoot a network..

Unless you connect manually, the router will not authenticate using PPPoE until 
data is transmitted to the network.

The factory default router address is 192.168.1.1. However, if the router detects a 
conflict with the address it gets from your modem, it automatically picks a different 
address for itself. In this case, you can log in to the router using 
www.routerlogin.net to verify its LAN IP address. Select LAN IP Setup under 
Advanced on the main menu. Take note of the LAN TCP/IP setup IP address, 
which should match the default gateway IP address on your computer.

This section includes advanced troubleshooting techniques.