Netgear WNDR3400v3 사용자 설명서
Hardware Setup
14
N600 Wireless Dual Band Router WNDR3400v3
Label
The label on the bottom of the router shows the WPS PIN, login information, MAC address,
and serial number.
and serial number.
Cable Your Router
Refer to the installation guide that came in the WNDR3400v3 router box for cabling
information.
information.
Verify the Cabling
Verify that your router is cabled correctly by checking the router LEDs. Turn on the router by
pressing the On/Off.
pressing the On/Off.
Table 2.
LED
Description
The Power/Test LED is green when the router is turned on.
The LAN ports are green for each computer cabled to the router by an Ethernet cable.
Verify that the LAN LEDs (1 through 4) are lit for any computers cabled to the router by an Ethernet
cable.
Verify that the LAN LEDs (1 through 4) are lit for any computers cabled to the router by an Ethernet
cable.