Netgear WNDR3400v3 사용자 설명서

changes, your router automatically contacts the Dynamic DNS service provider, logs in to 
your account, and registers your new IP address. If your host name is hostname, for 
example, you can reach your router at 

.

On the Advanced tab, select Advanced Setup > Dynamic DNS to display the following 
screen:



Register for an account with one of the Dynamic DNS service providers whose URLs 

appear in the Service Provider list. 

Select the Use a Dynamic DNS Service check box. 

Select the URL of your Dynamic DNS service provider. For example, for DynDNS.org, 

select www.dyndns.org.

Type the host name (or domain name) that your Dynamic DNS service provider gave you.

Type the user name for your Dynamic DNS account. This is the name that you use to log in 

to your account, not your host name.

Type the password (or key) for your Dynamic DNS account. 

Click Apply to save your configuration.

Static routes provide additional routing information to your router. Under usual 
circumstances, the router has adequate routing information after it has been configured for 
Internet access, and you do not need to configure additional static routes. You have to 
configure static routes only for unusual cases such as multiple routers or multiple IP subnets 
located on your network.

As an example of when a static route is needed, consider the following case:

Your primary Internet access is through a cable modem to an ISP.