Netgear WNR2000v5 전단

다운로드
페이지 2
June 2014
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered 
trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. 
Information is subject to change without notice. © NETGEAR, Inc. All rights reserved.
Join the WiFi Network
To connect your computer or WiFi device (such as a smartphone or gaming 
device) to your router’s WiFi network, you can use either the manual 
method or the Wi-Fi Protected Setup (WPS) method.
Manual Method
1.  Open the software utility that manages your WiFi connections on the 
computer or WiFi device that you want to connect to your router.
This utility scans for all wireless networks in your area.
2.  Find and select your modem router’s WiFi network name (SSID).
The SSID is on the product label.
3.  Enter the router’s password (or your custom password if you changed 
it) and click the 
Connect button.
The password is on the product label.
4.  Repeat Step 1 through Step 3 to add other computers or WiFi devices
WPS Method
If your computer or WiFi device supports WPS, you can use WPS to join 
the modem router’s WiFi network. For help with the WPS button on your 
computer or WiFi device, check the instructions or online help that came 
with that computer or WiFi device. Some older equipment cannot use WPS.
Note: 
WPS does not support WEP security. If you are using WEP security, 
use the manual method.
1.  Press the 
WPS button 
 on the router.
2.  Within two minutes, on your computer or WiFi device, press its 
WPS 
button or click its onscreen 
WPS button.
The WiFi LED 
 blinks green during the WPS process.
The computer or WiFi device connects to your router’s WiFi network.
3.  Repeat this process to add other computers or WiFi devices to the 
network.
View or Change the Router Settings
After you use genie to set up the router, you can log in to the router to view 
or change its settings.
1.  Connect a computer or wireless device to the router.
You can use a wired or WiFi connection:
•  For a wired connection, use an Ethernet cable (not included) to 
connect your computer to a black Ethernet LAN port on your 
router.
•  To connect with WiFi, use the WiFi network name (SSID) and 
password on the router labels on the bottom of the router.
2.  Launch a web browser.
3.  Type 
www.routerlogin.net in the address field of the browser.
A login screen displays.
4.  Enter 
admin for the user name and password for the password.
The router BASIC Home screen displays.
Restore Factory Settings
You can return the router to its factory default settings.
1.  Locate the round hole in the 
bottom of the router.
The Reset button is inside of this 
hole.
2.  Use a paperclip or sharp object to 
press and hold the 
Reset button 
for at least seven seconds.
The router resets and returns to 
its factory settings.
Support
Thank you for purchasing this NETGEAR product. 
After installing your device, locate the serial number on the label of your 
product and use it to register your product at 
You must register your product before you can use NETGEAR telephone 
support. NETGEAR recommends registering your product through the NETGEAR 
website. For product updates and web support, visit 
NETGEAR recommends that you use only the official NETGEAR support 
resources.
For the current EU Declaration of Conformity, visit  
For regulatory compliance information, visit  
/. 
See the regulatory compliance document before connecting the power supply.
You can get the user manual online at 
http://downloadcenter.netgear.com
 or 
through a link in the product’s user interface.