Netgear WNR2000-100FSS 사용자 설명서

When you click the Apply button, the IP address of the router 
changes and you are disconnected. To reconnect, close and restart 
your web browser, and type http://www.routerlogin.net.

You can set up the router to be used as a wireless base station or wireless repeater in a 
wireless distribution system (WDS). A WDS lets you expand a wireless network through 
multiple access points instead of using a wired backbone to link them. A wireless base station 
connects to the Internet, can have wired and wireless clients, and sends its wireless signal to 
an access point that functions as a wireless repeater. A wireless repeater can also have 
wired and wireless clients, but connects to the Internet through the wireless base station. 

The following figure shows a wireless repeating scenario.

The router can function either as a base station or as a repeater:

Wireless base station. The router acts as the parent access point, bridging traffic to and 
from the child repeater access point, as well as handling wireless and wired local 
computers. To configure this mode, you need to know the MAC addresses of the child 
repeater access point.