Netgear R6400 사용자 설명서

The router LEDs on the top panel indicate router activities and behavior. You can disable LED 
blinking for network communications, or turn off all LEDs except the Power LED.



Launch an Internet browser from a computer or wireless device that is connected to the 
network.

Type http://www.routerlogin.net or http://www.routerlogin.com.

A login window opens.

Enter the router user name and password.

The user name is admin. The default password is password. The user name and 
password are case-sensitive.

The BASIC Home page displays.

Select ADVANCED > Advanced Setup > LED Control Settings. 

By default, the Enable blinking on Internet LED, LAN LED, Wireless LED, and USB 
LED when data traffic is detected radio button is selected, which allows standard LED 
behavior. For information about standard LED behavior, see 

To disable blinking, select the Disable blinking on Internet LED, LAN LED, Wireless LED, 
and USB LED when data traffic is detected radio button.

To turn off the LEDs, select the Turn off all LEDs except Power LED radio button.

Click the Apply button.

Your change takes effect.

You can view or configure wide area network (WAN) settings for the Internet port. You can set 
up a DMZ (demilitarized zone) server, change the maximum transmit unit (MTU) size, and 
enable the router to respond to a ping to its WAN (Internet) port.