Netgear WG602NA 사용자 설명서

Advanced Configuration

5-1

This chapter describes how to configure the advanced features of your WG602 v3. These features 
can be found under the Advanced heading in the main menu.

The default advanced wireless settings usually work well. These settings should not be changed 
unless you are sure it is necessary. 

The packet size that is used to determine whether to use the CSMA/CD (Carrier Sense 
Multiple Access with Collision Detection) mechanism or the CSMA/CA mechanism for 
packet transmission. With the CSMA/CD transmission mechanism, the transmitting 
station sends out the actual packet as soon as it has waited for the silence period. With 
the CSMA/CA transmission mechanism, the transmitting station sends out an RTS 
packet to the receiving station, and waits for the receiving station to send back a CTS 
(Clear to Send) packet before sending the actual packet data. 

This is the maximum packet size used for fragmentation. Packets larger than the size 
programmed in this field will be fragmented. The Fragment Threshold value must be 
larger than the RTS Threshold value.

Default: 2346

Specifies the data beacon rate between 20 and 1000.

Specifies the Delivery Traffic Indication Message data beacon rate between 1 and 255.

Default: 1

A long transmit preamble may provide a more reliable connection or slightly longer 
range. A short transmit preamble gives better performance.

Default: Mix