Netgear JNR1010v2 사용자 설명서
Hardware Setup
14
JNR1010v2 N150 Wireless Router
6.
Connect a computer or wireless device to the router.
You have two options:
•
Connect with an Ethernet cable. Securely insert the cable that you removed from
the modem in
the modem in
into one of the router’s Ethernet ports.
•
Connect without an Ethernet cable. For more information, see
23.
(Not included)
(Not included)
Your network cables are connected and you are ready to start your network. It is important
that you start your network in the correct sequence.
that you start your network in the correct sequence.
To start your network:
1.
Power on the modem.
2.
After the modem turns on, connect the router’s power adapter to an AC outlet and then to
the AC power connector on the back of the router.
Verify the Cabling
Verify that your router is cabled correctly and the cables are attached securely by checking
the router LEDs:
the router LEDs:
•
The Power LED
is solid green when the router is turned on.
•
The WiFi LED
is solid green.
•
The Internet LED
is solid green.
•
The Ethernet LEDs (1 through 4)
are solid green or solid amber for any
computers cabled to the router by an Ethernet cable.