Netgear JNR1010v2 사용자 설명서

The following table describes common MTU sizes and applications. 

1500

The largest Ethernet packet size. This value is the typical setting for non-PPPoE, 
non-VPN connections, and is the default value for NETGEAR routers, adapters, and 
switches.

1492

Used in PPPoE environments.

1472

Maximum size to use for pinging. (Larger packets are fragmented.)

1468

Used in some DHCP environments.

1460

Usable by AOL if you do not have large email attachments, for example.

1436

Used in PPTP environments or with VPN.

1400

Maximum size for AOL DSL.

576

Typical value to connect to dial-up ISPs.



Log in to the router.

18.

Select ADVANCED > Setup > WAN Setup. 

The WAN Setup screen displays.

In the MTU Size field, enter a new size from 64 through 1500.

Click the Apply button.

Your changes are saved.

You can configure LAN IP services such as Dynamic Host Configuration Protocol (DHCP) 
and Routing Information Protocol (RIP).

The router is shipped preconfigured to use private IP addresses on the LAN side and to 
function as a DHCP server. The router’s default LAN IP configuration includes the following 
settings:

LAN IP address. 192.168.1.1

Subnet mask. 255.255.255.0

These addresses are part of the designated private address range for use in private networks 
and are suitable for most applications. If your network requires the use of a different IP 
addressing scheme, change the settings in the LAN Setup screen.