Netgear JNR1010v2 사용자 설명서

For you to set up a wireless network in a WDS, 

t

he following conditions must be met for both 

access points:

Both access points must use the same SSID, wireless channel, and encryption mode.

Both access points must be on the same LAN IP subnet. That is, all the access point LAN 
IP addresses are in the same network.

All LAN devices (wired and wireless computers) must be configured to operate in the 

same LAN network address range as the access points.

The channel selection on the access points cannot be Auto (see 

28).

The security option must be WEP (or no security). The WEP option displays only if you 
select Up to 54 Mbps from the Mode list on the Wireless Settings screen (see 

The wireless repeating function works only in hub and spoke mode. The units cannot be 
daisy-chained. You must know the wireless MAC addresses of all units. First, set up the base 
station and then set up the repeater.



Log in to the router.

18.

Select ADVANCED > Advanced Setup > Wireless Repeating Function. 

The Wireless Repeating Function screen displays. The wireless MAC address of the 
router displays onscreen.

Select the Enable Wireless Repeating Function check box.