Netgear JNR1010v2 사용자 설명서
Advanced Settings
68
JNR1010v2 N150 Wireless Router
By default, the Active check box is selected.
7.
Type the IP address of the final destination.
8.
Type the IP subnet mask for this destination. If the destination is a single host, type
255.255.255.255.
9.
Type the gateway IP address, which must be a router on the same LAN segment as the
JNR1010v2 N150 Wireless Router.
10.
Type a number from 1 through 15 as the metric value.
This value represents the number of routers between your network and the destination.
Usually, a setting of 2 or 3 works, but if this link is a direct connection, set it to 1.
Usually, a setting of 2 or 3 works, but if this link is a direct connection, set it to 1.
11.
Click the Apply button.
The route is added to the table on the Static Routes screen.
To edit or delete a static route:
1.
Log in to the router.
18.
2.
Select ADVANCED > Advanced Setup > Static Routes.
The Static Routes screen displays.
3.
In the table, select the radio button next to the route that you want to edit or delete.
4.
To edit the route, click the Edit button.
The Static Routes screen adjusts.
a. Edit the route information.
b. Click the Apply button.
b. Click the Apply button.
5.
To delete the route, click the Delete button.
The route is removed from the table.
Universal Plug and Play
Universal Plug and Play (UPnP) helps devices, such as Internet appliances and computers,
to access the network and connect to other devices as needed. UPnP devices can
automatically discover the services from other registered UPnP devices on the network.
to access the network and connect to other devices as needed. UPnP devices can
automatically discover the services from other registered UPnP devices on the network.
Note:
If you use applications such as multiplayer gaming, peer-to-peer
connections, or real-time communications such as instant messaging
or remote assistance, enable UPnP.
connections, or real-time communications such as instant messaging
or remote assistance, enable UPnP.