Netgear JNR1010v2 사용자 설명서
Monitoring
73
JNR1010v2 N150 Wireless Router
Router Information Pane
To display the Router Information pane:
1.
Log in to the router.
18.
2.
Click the ADVANCED tab.
The Router Status screen displays. The Router Information pane is located in the upper
left of the screen.
left of the screen.
The following information displays:
•
Hardware Version. The router model.
•
Firmware Version. The version of the router firmware. It changes if you upgrade the
router firmware.
router firmware.
•
GUI Language Version. The localized language of the router user interface.
•
LAN Port:
-
MAC Address. The Media Access Control address for the Ethernet (LAN) port.
This address is the unique physical address that the Ethernet (LAN) port of the
router uses.
This address is the unique physical address that the Ethernet (LAN) port of the
router uses.
-
IP Address. The IP address that the Ethernet (LAN) port of the router uses. The
default is 192.168.1.1.
default is 192.168.1.1.
-
DHCP Server. Identifies whether the router’s built-in DHCP server is active for the
LAN-attached devices.
LAN-attached devices.
Internet Port Pane
To display the Internet Port pane:
1.
Log in to the router.
18.
2.
Click the ADVANCED tab.
The Router Status screen displays. The Internet Port pane is located in the upper right of
the screen.
the screen.
The following information displays:
•
MAC Address. The Media Access Control (MAC) address for the Internet port. This
address is the unique physical address that the Internet (WAN) port of the router
uses.
address is the unique physical address that the Internet (WAN) port of the router
uses.
•
IP Address. The IP address that the Internet (WAN) port of the router uses. If no
address is shown or the address is 0.0.0.0, the router is not connected to the Internet.
address is shown or the address is 0.0.0.0, the router is not connected to the Internet.