Netgear R7500 사용자 설명서
Network Settings
136
Nighthawk
X4
AC2350
Smart
WiFi Router
•
Enable fixed IP settings on this device (not recommended). Use this setting if you
want to manually assign a specific IP address to this router while it is in AP mode.
Using this option effectively requires advanced network experience.
want to manually assign a specific IP address to this router while it is in AP mode.
Using this option effectively requires advanced network experience.
Note:
To avoid interference with other routers or gateways in your network,
NETGEAR recommends that you use different wireless settings on
each router. You can also turn off the wireless radio on the other router
or gateway and use the R7500 router only for wireless client access.
NETGEAR recommends that you use different wireless settings on
each router. You can also turn off the wireless radio on the other router
or gateway and use the R7500 router only for wireless client access.
8.
Click the Apply button.
The IP address of the router changes, and you are disconnected.
9.
To reconnect, close and restart your browser and type http://www.routerlogin.net.
Use the Router in Bridge Mode
You can use your router in bridge mode to connect multiple devices with WiFi at the faster
802.11ac speed. To do this, you need two WiFi routers: one set up as a router and the other
set up as a bridge.
802.11ac speed. To do this, you need two WiFi routers: one set up as a router and the other
set up as a bridge.
Figure 13. Router in bridge mode with an 802.11ac WiFi connection
Installing your router as a bridge offers the following benefits:
•
You can take advantage of gigabit WiFi speeds on current devices.
•
Use gigabit WiFi for applications like video and gaming.
•
Connect multiple devices like NAS, Smart TV, NeoTV, Blu-ray player, and game consoles
at gigabit WiFi speeds using a WiFi link.
at gigabit WiFi speeds using a WiFi link.