Netgear R6300v2 사용자 설명서

You can set up the device name, workgroups, and network folders for your USB device. 



Select ADVANCED > USB Storage > Advanced Settings.

Specify access to the USB storage device. 

Network Device Name. The default name is readyshare. This name is used to 
access the USB device connected to the router. 

Workgroup. If you are using a Windows workgroup rather than a domain, the 
workgroup name is displayed here. The name works only in an operating system that 
supports NetBIOS, such as Microsoft Windows.

Access Method. Select the check boxes for the access methods that you want. 

HTTP. Enabled by default. You can type 
http://readyshare.routerlogin.net/shares to access the USB drive.

HTTP (via Internet). Disabled by default. If you enable this feature, remote users 
can type http://<public IP address/shares> (for example, 
http://1.1.10.102/shares) or a URL domain name to access the USB drive over the 
Internet. This feature supports file uploading only.

FTP. Disabled by default.

FTP (via Internet). Disabled by default. If you select this check box, remote users 
can access the USB drive through FTP over the Internet. This feature supports 
both downloading and uploading of files.

If you changed the settings, click Apply.

Your changes are saved.