Netgear R6300v2 사용자 설명서

You can use this screen to turn the wireless radio on and off, to specify WPS settings, to use 

AP mode, and to set up a wireless access list.

The Fragmentation Length, CTS/RTS Threshold, and Preamble Mode options in this screen 
are reserved for wireless testing and advanced configuration only. Do not change these 
settings unless you have a specific reason to do so.

By default, the wireless radio is enabled so that you can connect wirelessly to the router. You 
can turn the wireless radio on or off in the Advanced Wireless Settings screen or by using the 
WiFi On/Off button on the router side panel. When the wireless radio is off, you can still use 
an Ethernet cable for a LAN connection to the router.



Select ADVANCED > Advanced Setup > Wireless Settings.

By default, the Enable Wireless Router Radio check box is selected.

Select or clear the Enable Wireless Router Radio check box.

Clearing this check box turns off the WiFi feature of the wireless router. 

(Optional) Select the Turn off wireless signal by schedule check box and fill in the fields 

to specify the times when you do not need a wireless connection. 

For example, you could turn off the wireless signal for the weekend if you leave town.

Click the Apply button.