Netgear R6300-100NAS 사용자 설명서

To edit a folder, select its radio button, and then click Edit.

You can use this screen to select a folder, change the share name, or change the read 

access or write access from All – no password to admin. 

The user name (account name) for All – no password is guest. The password for admin is 
the same one that is used to log in to the router. By default, it is password.

Click Apply for your changes to take effect.

USB Storage Advanced Settings

You can set up the device name, workgroups, and network folders for your USB device. On 
the Advanced tab, select USB Storage > Advanced Settings to display the following 
screen:

You can use this screen to specify access to the USB storage device. 

. The default is readyshare. This is the name used to access the 

USB device connected to the router. 

. If you are using a Windows workgroup rather than a domain, the workgroup 

name is displayed here. The name works only in an operating system that supports 
NetBIOS, such as Microsoft Windows.

. The access methods are described here.

. Enabled by default, this connection allows all users on the LAN to 

have access to the USB drive.

. Enabled by default. You can type http://readyshare.routerlogin.net/shares to 

access the USB drive.

. Disabled by default. If you enable this setting, remote users can type 

http://<public IP address/shares>

 (for example, http://1.1.10.102/shares) or a URL 

domain name to access the USB drive over the Internet. This setting supports file 
uploading only.