Netgear R6300-100NAS 사용자 설명서
Advanced Settings
88
R6300 WiFi Router 802.11ac Dual Band Gigabit
3.
In the Wireless Repeating Function screen, select the Enable Wireless Repeating
Function
Function
check box and select the Wireless Base Station radio button.
4.
Enter the MAC address for one or more repeater units.
5.
Click Apply to save your changes.
Set Up a Repeater Unit
Use a wired Ethernet connection to set up the repeater unit to avoid conflicts with the wireless
connection to the base station.
connection to the base station.
Note:
If you are using the R6300 base station with a non-NETGEAR router
as the repeater, you might need to change additional configuration
settings. In particular, you should disable the DHCP server function
on the wireless repeater
settings. In particular, you should disable the DHCP server function
on the wireless repeater
AP.
To configure the router as a repeater unit:
1.
Log in to the router that will be the repeater. Select Basic > Wireless Settings and
verify that the wireless settings match the base unit exactly. The wireless security option
has to be set to WEP or None.
2.
Select Advanced > Wireless Repeating Function, and select the Enable Wireless
Repeating Function
Repeating Function
check box and the Wireless Repeater radio button.
3.
Fill in the Repeater IP Address field. This IP address has to be in the same subnet as the
base station, but different from the LAN IP address of the base station.
4.
Click Apply to save your changes.
5.
Verify connectivity across the LANs.
A computer on any wireless or wired LAN segment of the router should be able to
connect to the Internet or share files and printers with any other wireless or wired
computer or server connected to the other access point.
computer or server connected to the other access point.
Port Forwarding and Triggering
By default, the router blocks inbound traffic from the Internet to your computers except replies
to your outbound traffic. You might need to create exceptions to this rule for these purposes:
to your outbound traffic. You might need to create exceptions to this rule for these purposes:
•
To allow remote computers on the Internet to access a server on your local network.
•
To allow certain applications and games to work correctly when your router does not
recognize their replies.
Your router provides two features for creating these exceptions: port forwarding and port
triggering. The next sections provide background information to help you understand how
port forwarding and port triggering work, and the differences between the two.
triggering. The next sections provide background information to help you understand how
port forwarding and port triggering work, and the differences between the two.