Netgear R6300-100NAS 사용자 설명서
Advanced Settings
94
R6300 WiFi Router 802.11ac Dual Band Gigabit
3.
Click the Add Custom Service button to display the following screen:
4.
In the Service Name field, enter a descriptive name.
5.
In the Protocol list, select the protocol. If you are unsure, select TCP/UDP.
6.
In the Starting Port field, enter the beginning port number.
•
If the application uses a single port, enter the same port number in the Ending Port
field.
•
If the application uses a range of ports, enter the ending port number of the range in
the Ending Port field.
7.
In the Server IP Address field, enter the IP address of your local computer that will provide
this service.
8.
Click Apply. The service appears in the list in the Port Forwarding/Port Triggering screen.
Editing or Deleting a Port Forwarding Entry
To edit or delete a port forwarding entry:
1.
In the table, select the radio button next to the service name.
2.
Click Edit Service or Delete Service.
Application Example: Making a Local Web Server Public
If you host a web server on your local network, you can use port forwarding to allow web
requests from anyone on the Internet to reach your web server.
requests from anyone on the Internet to reach your web server.
To make a local web server public:
1.
Assign your web server either a fixed IP address or a dynamic IP address using DHCP
address reservation. In this example, your router always gives your web server an IP
address of 192.168.1.33.