Netgear WAB102 사용자 설명서

Introduction

The WAB102 Dual Band Wireless Access Point provides these status LEDs.

The following table explains the LED indicators:

Power

Off

On

No power. If this LED does not come on with the power adapter and 
cord correctly installed, see Chapter 4, 

.

Power is on.

Blink

Indicates self test, loading software, or system fault (if continues).
Note: This LED may blink for a minute before going on steady.

Ethernet

Link/Activity 

Off

Green On

Indicates no Ethernet link detected.
100Mbps Fast Ethernet link detected, no activity

Green Blink

Indicates data traffic on the 100Mbps LAN

Amber On

10Mbps Ethernet Link detected but no activity.

Amber Blink

Indicates data traffic on the 10Mbps LAN

802.11a WLAN

Link/Activity

Off

 No wireless link.

Slow Blink

Fast Blink

Associated with network but no activity.
Indicates the WAB102 802.11a wireless data transmission.

802.11b WLAN

Link/Activity 

Off

No wireless link.

Slow Blink

Fast Blink

Associated with network but no activity
Indicates the WAB102 is 802.11b wireless data transmission.