Netgear R7000 사용자 설명서

The router has status LEDs on top and a USB 3.0 port on the front.

Power

•

Solid amber. The router is starting.

•

Blinking amber. The firmware is upgrading, or the Reset button was pressed.

•

Solid white. The router is ready.

•

Blinking white. The firmware is corrupted. 

•

Off. Power is not supplied to the router.

Internet

•

Solid white. The Internet connection is ready.

•

Solid amber. The router has detected an Ethernet cable connection to the modem.

•

Off. No Ethernet cable is connected between the router and the modem.

2.4 GHz 
Wireless

•

Solid white. The 2.4 GHz WiFi radio is operating.

•

Blinking. The router is sending or receiving WiFi traffic.

•

Off. The 2.4 GHz WiFi radio is off.

5 GHz Wireless

•

Solid white. The 5 GHz WiFi radio is operating.

•

Blinking. The router is sending or receiving WiFi traffic.

•

Off. The 5 GHz WiFi radio is off.

USB (1 and 2)

The USB 1 LED is for the USB 3.0 USB port on the front panel. The USB 2 LED is for the USB 
2.0 port on the rear panel. 

•

Solid white. A USB device is connected and is ready. 

•

Blinking. A USB device is plugged in and is trying to connect. 

•

Off. No USB device is connected or someone clicked the Safely Remove Hardware 
button, and it is now safe to remove the attached USB device.