Netgear R7000 사용자 설명서

Select ADVANCED > Advanced Setup > Wireless Repeating Function.

Select the Enable Wireless Repeating Function check box.

Select the Wireless Base Station radio button.

To prevent wireless clients from associating with the base station and allow LAN client 
associations only, select the Disable Wireless Client Association check box. 

You can leave the check box cleared if you prefer wireless clients to be able to associate 
with the base stations.

In the Repeater MAC Address 1 through 4 fields, enter the MAC addresses for the access 
points that should function as repeaters.

If your router is the base station, it can function as the “parent” for up to four other access 
points.

Click the Apply button. 

Your changes are saved.

Use a wired Ethernet connection to set up the repeater unit to avoid conflicts with the wireless 
connection to the base station.

If you are using the router as the base station with a non-NETGEAR router as the repeater, 
you might need to change more configuration settings. In particular, disable the DHCP server 
function on the access point that is the repeater.



Launch an Internet browser from a computer or wireless device that is connected to the 
network of the router to be the repeater.