Netgear R7000 사용자 설명서

Type the port numbers in the Internal Starting Port and Internal Ending Port fields.

Type the IP address in the Internal IP address field or select the radio button for an 
attached device listed in the table.

Click the Apply button. 

The service is now in the list on the Port Forwarding/Port Triggering screen.



Launch an Internet browser from a computer or wireless device that is connected to the 
network.

Type http://www.routerlogin.net or http://www.routerlogin.com.

A login screen displays.

Enter the router user name and password.

The user name is admin. The default password is password. The user name and 
password are case-sensitive.

The BASIC Home screen displays.

Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering.

Leave the Port Forwarding radio button selected as the service type

In the table, select the radio button next to the service name.

Click the Edit Service button.

The Ports - Custom Services screen displays.

Specify changes to any of the following settings:

Service Name. Type the service name.

Service Type. If you are unsure, select TCP/UDP.

External Starting Port: If the application uses a single port, enter the same port 
number in the External Ending Port field. If the application uses a range of ports, 
enter the ending port number of the range in the External Ending Port field.

For the internal ports, leave the Use the same port range for Internal port check 
box selected.

Internal IP address. Type the IP address in the Internal IP address field, or select the 
radio button for an attached device listed in the table.

Click the Apply button.

Your changes are saved.