Netgear R7000 사용자 설명서

The BASIC Home screen displays.

Select ADVANCED > Security > Access Control.

Select the Turn on Access Control check box.

You must select this check box before you can specify an access rule and use the Allow 
and Block buttons. When this check box is cleared, all devices are allowed to connect, 
even if the device is in the blocked list.

To specify the access rule, select one of the following radio buttons:

Allow all new devices to connect. With this setting, if you buy a new device, it can 

access your network. You don’t need to enter its MAC address in this screen. 
NETGEAR recommends that you leave this radio button selected.

Block all new devices from connecting. With this setting, if you buy a new device, 
before it can access your network, you must enter its MAC address for an Ethernet 
connection and its MAC address for a WiFi connection in the allowed list.

The access rule does not affect previously blocked or allowed devices. It applies only to 
devices joining your network in the future after you apply these settings.

To allow the computer or device you’re currently using to continue to access the network, 
select the check box next to your computer or device, and click the Allow button.

Click the Apply button.

Your changes take effect.

You can use keywords to block certain Internet sites from your network. You can use blocking 
all the time or based on a schedule.



Launch an Internet browser from a computer or wireless device that is connected to the 
network.

Type http://www.routerlogin.net or http://www.routerlogin.com.

A login screen displays.

Enter the router user name and password.

The user name is admin. The default password is password. The user name and 
password are case-sensitive.

The BASIC Home screen displays.