Netgear DGN1000V3 사용자 설명서

If the Power LED blinks slowly and continuously, the firmware of the modem router is 
corrupted. This can occur if a firmware update is interrupted, or if the modem router detects a 
problem with the firmware.

If the error persists, you have a hardware problem. For recovery instructions, or help with a 
hardware problem, contact technical support at 

.

If the WiFi LED 

 stays off, check to see if the WiFi On/Off button on the modem router has 

been pressed. This button turns the wireless radio in the modem router on and off. The WiFi 
LED lights when the wireless radio is turned on.

If the LAN LED 

 for a port does not light when you connect a device, check the following:

The Ethernet cable connections are secure at the modem router and at the hub or device.

The power is turned on to the connected hub or device.

You are using the correct cable.

If you are unable to log in to the modem router from a computer on your local network, check 
the following:

If you are using an Ethernet-connected computer, check the Ethernet connection 
between the computer and the modem router (see the previous section).

Make sure that your browser has Java, JavaScript, or ActiveX enabled. If you are using 
Internet Explorer, click Refresh to be sure that the Java applet is loaded.

Try quitting the browser and launching it again.

Make sure that you are using the correct login information. The factory default login name 
is admin, and the password is password. Make sure that Caps Lock is off when you 
enter this information.

Make sure that your computer’s IP address is on the same subnet as the modem router. 
If you are using the recommended addressing scheme, your computer’s address must be 
in the range of 192.168.0.2 to 192.168.0.254. 

If your computer’s IP address is shown as 169.254.x.x, recent versions of Windows and 
Mac OS generate and assign an IP address if the computer cannot reach a DHCP server. 
These autogenerated addresses are in the range of 169.254.x.x. If your IP address is in 
this range, check the connection from the computer to the modem router, and reboot your 
computer.