Netgear DGN1000V3 사용자 설명서
Supplemental Information
143
N150 Wireless ADSL2+ Modem Router DGN1000v3
Factory Settings
You can return the modem router to its factory settings. On the right side panel of the modem
router, use the end of a paper clip or some other similar object to press and hold the Restore
Factory Settings button for at least seven seconds. (For more information about the location
of the button, see
router, use the end of a paper clip or some other similar object to press and hold the Restore
Factory Settings button for at least seven seconds. (For more information about the location
of the button, see
12.) The modem
router returns to the factory settings shown in the following table.
Table 3. Factory default settings
Feature
Default Behavior
Router Login
User login URL
User name (case-sensitive)
admin
Login password (case-sensitive)
password
Internet
connection
connection
WAN MAC address
Use default address
WAN MTU size
1492
Port speed
AutoSensing
Local network
(LAN)
(LAN)
LAN IP
192.168.0.1
Subnet mask
255.255.255.0
RIP direction
None
RIP version
Disabled
RIP authentication
None
DHCP server
Enabled
DHCP starting IP address
192.168.0.2
DHCP ending IP address
192.168.0.254
DMZ
Enabled or disabled
Time zone
GMT for WW except GR, GMT+1 for GR, GMT-8 for NA
Time zone adjusted for daylight
savings time
savings time
Disabled
SNMP
Disabled
Firewall
Inbound (communications coming
in from the Internet)
in from the Internet)
Disabled (except traffic on port 80, the HTTP port)
Outbound (communications going
out to the Internet)
out to the Internet)
Enabled (all)
Source MAC filtering
Disabled