Netgear DGN1000V3 사용자 설명서
NETGEAR genie Basic Settings
24
N150 Wireless ADSL2+ Modem Router DGN1000v3
xDSL Setup
NETGEAR recommends that you use the Setup Wizard to detect the DSL connection and
automatically set up the modem router (see
automatically set up the modem router (see
If you have technical experience and are sure of the correct DSL mode, multiplexing method,
and virtual circuit number for the virtual path identifier (VPI) and virtual channel identifier
(VCI), you can specify those settings on the xDSL Setup screen. NETGEAR recommends
that you enter the multiplexing method, VPI, and VCI only if your ISP provided you this
information.
and virtual circuit number for the virtual path identifier (VPI) and virtual channel identifier
(VCI), you can specify those settings on the xDSL Setup screen. NETGEAR recommends
that you enter the multiplexing method, VPI, and VCI only if your ISP provided you this
information.
To view or change the DSL setup:
1.
Select BASIC > xDSL Setup.
The selection from the Physical WAN Type menu is fixed at ADSL2+.
2.
From the DSL Mode menu, select the DSL mode that your ISP provided you:
•
Auto. The modem router detects the DSL mode automatically. This is the default
setting.
•
ADSL (g.dmt).
•
ADSL2.
•
ADSL2+.
3.
Click the upper Apply button.
The DSL mode is saved.
4.
From the Multiplexing Method menu, select LLC-based or VC-based, as indicated by your
ISP.
ISP.
5.
For the VPI, type a number between 0 and 255, as indicated by your ISP.
The default setting is 0.
6.
For the VCI, type a number between 32 and 65535, as indicated by your ISP.
The default setting is 38.
7.
Click the lower Apply button.
The PVC settings are saved.