Netgear WG602 V2 사용자 설명서

Basic Installation and Configuration

3-2

For best results, place your wireless access point:

•

Near the center of the area in which your PCs will operate.

•

In an elevated location such as a high shelf where the wirelessly connected PCs have 
line-of-sight access (even if through walls).

•

Away from sources of interference, such as PCs, microwaves, and 2.4 GHz cordless phones.

•

Away from large metal surfaces.

•

If using multiple access points, it is better if adjacent access points use different 

radio frequency 

Channels to reduce interference. The recommended Channel spacing between adjacent access 
points is 5 Channels (for example, use Channels 1 and 6, or 6 and 11).

The time it takes to establish a wireless connection can vary depending on both your security 
settings and placement.

When you first receive your WG602 v2, the default factory settings will be set as shown below. To 
restore these defaults, see 

.

User Name (case sensitive)

Password (case sensitive)

Access Point Name

DHCP

IP Configuration 

if DHCP server is unavailable

Wireless Mode (Access Point or Bridge)

Wireless Network Name (SSID)

Broadcast Network Name 

802.11g/b 

Radio Frequency Channel

WEP/WPA

Authentication Type