Netgear WG602 V2 사용자 설명서

Preparing Your PCs for Network Access

D-1

This appendix describes how to prepare your PCs to connect to the Internet through the 54 Mbps 
Wireless Access Point WG602 v2. 

For adding file and print sharing to your network, please consult the Windows help information 
included with the version of Windows installed on each computer on your network.

Computers access the Internet using a protocol called TCP/IP (Transmission Control Protocol/
Internet Protocol). Each computer on your network must have TCP/IP installed and selected as its 
networking protocol. If a Network Interface Card (NIC) is already installed in your PC, then TCP/
IP is probably already installed as well.

Most operating systems include the software components you need for networking with TCP/IP. 
Windows 95 or later includes the software components for establishing a TCP/IP network. 

In your TCP/IP network, each PC and the wireless access point must be assigned a unique IP 
addresses. Each PC must also have certain other TCP/IP configuration information such as a 
subnet mask (netmask), a domain name server (DNS) address, and a default gateway address. In 
most cases, you should install TCP/IP so that the PC obtains its specific network configuration 
information automatically from a DHCP server during startup.