Netgear R6700 사용자 설명서

The screen adjusts:

The router automatically detects the information in the Router’s IPv6 Address on LAN 
field. This field shows the IPv6 address that is acquired for the router’s LAN interface. The 
number after the slash (/) is the length of the prefix, which is also indicated by the 
underline (_) under the IPv6 address. If no address is acquired, the field displays Not 

Available.

Select a Remote 6to4 Relay Router radio button:

Auto. Your router uses any remote relay router that is available on the Internet. This 

is the default setting.

Static IP Address. Enter the static IPv4 address of the remote relay router. Your IPv6 
ISP usually provides this address.

Select an IP Address Assignment radio button:

Use DHCP Server. This method passes more information to LAN devices but some 
IPv6 systems might not support the DHCv6 client function.

Auto Config. This is the default setting.

This setting specifies how the router assigns IPv6 addresses to the devices on your home 
network (the LAN).

(Optional) Select the Use This Interface ID check box and specify the interface ID to be 

used for the IPv6 address of the router’s LAN interface.

If you do not specify an ID here, the router generates one automatically from its MAC 
address.

Click the Apply button.

Your settings are saved.

In pass-through mode, the router works as a Layer 2 Ethernet switch with two ports (LAN and 
WAN Ethernet ports) for IPv6 packets. The router does not process any IPv6 header packets.