Netgear MBR1210 사용자 설명서

WPS PIN Entry

Any wireless computer or device that will connect to the router wirelessly is a client. The 
client must support a WPS PIN, and must have a WPS configuration utility, such as the 
NETGEAR Smart Wizard or Atheros Jumpstart.

The first time you add a WPS client, make sure that the Keep Existing Wireless Settings 
check box on the WPS Settings screen is cleared. This is the default setting for the router, 
and allows it to generate the SSID and WPA/WPA2 security settings when it implements 
WPS. After WPS is implemented, the router automatically selects this check box so that your 
SSID and wireless security settings stay the same if other WPS devices are added later.

11.

On the router main menu, select Add WPS 

Client (computers that will connect 

wirelessly to the router are clients), and 

then click Next. The Add WPS Client 

screen displays.

Select the PIN Number radio button.

Go to the client wireless computer. Run a 

WPS configuration utility. Follow the utility’s 

instructions to generate a PIN. Take note of the client PIN.

In the router Add WPS Client screen, enter the client PIN number, and then click Next.

The router tries to communicate with the client for 4 minutes. If no WPS clients 

connect during this time, the router wireless settings do not change.

The router WPS screen confirms that the client was added to the wireless network. 

The router generates an SSID, and implements WPA/WPA2 wireless security. 

Note the new SSID and WPA/WPA2 password for the wireless network. You can view these 

27.

To access the Internet from any computer connected to your router, launch an Internet 
browser such as Mozilla Firefox. You should see the router’s Internet LED blink.