Netgear WNDR3300 사용자 설명서

A-4

Technical Specifications

You can restore the factory default configuration settings to reset the router’s user name to admin, 
the password to password, and the IP address to www.routerlogin.net. This procedure erases 
your current configuration, including your wireless security settings, and restores the factory 
defaults. When you log in after resetting, the Smart Wizard configuration assistant prompts you to 
configure these settings.

LAN

10BASE-T or 100BASE-Tx, RJ-45

WAN

10BASE-T or 100BASE-Tx, RJ-45

Wireless

Maximum wireless signal rate complies with the IEEE 
802.11 standard. Actual throughput will vary. Network 
conditions and environmental factors, including 
volume of network traffic, building materials and 
construction, and network overhead, lower actual 
data throughput rate. 

Radio Data Rates

Auto Rate Sensing

Frequency

2.4 GHz and 5 GHz

Data Encoding

Standards
IEEE 802.11n draft version 1.0
IEEE 802.11n, IEEE 802.11g, IEEE 802.11b 2.4 GHz
IEEE 802.11n, IEEE 802.11g 5.0 GHz

Maximum Computers Per Wireless 
Network

Limited by the amount of wireless network traffic 
generated by each node. Typically 30–70 nodes.

Operating Frequency Ranges 2.4G Ghz

2.412–2.462 GHz (US)
2.412–2.472 GHz (Japan)
2.412–2.472 GHz (Europe ETSI)

Operating Frequency Ranges 5G Ghz

5.18–5.24 + 5.745–5.825 GHz (US)
5.18–5.24 GHz (Europe ETSI)

802.11 Security

40-bit (also called 64-bit) and 128-bit WEP, 
WPA-PSK, and WPA2-PSK.