Netgear WNDR3300 사용자 설명서

5-8

Fine-Tuning Your Network

2. Click Add Custom Service. The Ports - Custom Services screen displays.

3. In the Service Name field, type a descriptive name. 

4. In the Service Type list, select the protocol. If you are unsure, select TCP/UDP.

5. In the Starting Port field, type the beginning port number. 

•

If the application uses only a single port, type the same port number in the Ending Port 
field. 

•

If the application uses a range of ports, type the ending port number of the range in the 
Ending Port field. 

6. In the Server IP Address field, type the IP address of your local computer that will provide 

this service.

7. Click Apply. The service appears in the list in the Port Forwarding/Port Triggering screen.

To edit or delete a port forwarding entry:

1. In the table, select the radio button next to the service name.

2. Click Edit Service or Delete Service.

If you host a Web server on your local network, you can use port forwarding to allow Web requests 
from anyone on the Internet to reach your Web server.