Netgear WGR826V 사용자 설명서

Setting Up Advanced Router Configurations

7-7

 

The default DMZ server feature is helpful when using some online games and videoconferencing 
applications that are incompatible with NAT. The router is programmed to recognize some of these 
applications and to work properly with them, but there are other applications that may not function 
well. In some cases, one local computer can run the application properly if that computer’s IP 
address is entered as the default DMZ server.

Incoming traffic from the Internet is normally discarded by the router unless the traffic is a 
response to one of your local computers or a service that you have configured in the Ports menu. 
Instead of discarding this traffic, you can have it forwarded to one computer on your network. This 
computer is called the Default DMZ Server.

The WAN Setup menu, shown below lets you configure a Default DMZ Server.

To assign a computer or server to be a Default DMZ server, follow these steps: 

1.

Click WAN Setup on the Advanced section of the main menu. 

2.

Type the IP address for that server. To remove the default DMZ server, replace the IP address 
numbers with all zeros.

3.

Click Apply to save your settings.

DMZ servers pose a security risk. A computer designated as the default DMZ 

server loses much of the protection of the firewall, and is exposed to exploits from the 
Internet. If compromised, the DMZ server can be used to attack your network.