Netgear WG302NA 사용자 설명서

2-2

Introduction

The WG302 Access Point is easy-to-use and provides solid wireless and networking support.

The following standards and conventions are supported:

•

Standards Compliant.  The Wireless Access Point complies with the IEEE 802.11g for 
Wireless LANs.

•

WEP support. Support for WEP is included. 64-bit, 128-bit, and 152-bit keys are supported.

•

Full WPA and WPA2 support. WPA and WPA2 enterprise class strong security with 
RADIUS and certificate authentication as well as dynamic encryption key generation. 
WPA-PSK and WPA2-PSK pre-shared key authentication without the overhead of RADIUS 
servers but with all of the strong security of WPA.

•

DHCP Client Support. DHCP provides a dynamic IP address to PCs and other devices upon 
request. The WG302 can act as a client and obtain information from your DHPC server.

•

SNMP Support. Support for Simple Network Management Protocol (SNMP) Management 
Information Base (MIB) management.

The NETGEAR WG302 provides solid functionality, including these features:

•

AutoCell RF Management. AutoCell provides advanced automated RF management that 
improves performance and enhances security.

Wireless Access Point. Operates as a standard 802.11g.

Point-to-Point Bridge. In this mode, the WG302 only communicates with another 
bridge-mode wireless station. You must enter the MAC address (physical address) of the 
other bridge-mode wireless station in the field provided. WEP should be used to protect 
this communication. 

Point-to-Multi-Point Bridge. Select this only if this WG302 is the “Master” for a group 
of bridge-mode wireless stations. The other bridge-mode wireless stations must be set to 
Point-to-Point Bridge mode, using this WG302's MAC address. They then send all traffic 
to this “Master”, rather than communicate directly with each other. WEP should be used to 
protect this traffic.