Netgear WG302NA 사용자 설명서
Management
4-1
July 2005 v3.0
Chapter 4
Management
This chapter describes how to use the management features of your NETGEAR ProSafe Wireless
Access Point 802.11g WG302. These features can be found by clicking on the Maintenance
heading in the Main Menu of the browser interface.
Access Point 802.11g WG302. These features can be found by clicking on the Maintenance
heading in the Main Menu of the browser interface.
Remote Management
Access the Remote Management screen by clicking on Remote Management under Management
on the main menu.
on the main menu.
Figure 4-1: Remote Management screen
Enter the Remote Management information.
•
Remote Console, Secure Shell (SSH): If set to Enable, the Wireless Access Point will only
allow remote access via Secure Shell and Secure Telnet. The default is Enable.
allow remote access via Secure Shell and Secure Telnet. The default is Enable.
•
SNMP: Enable SNMP to allow the SNMP network management software, such as HP
OpenView, to manage the wireless access point via SNMPv1/v2 protocol.
OpenView, to manage the wireless access point via SNMPv1/v2 protocol.
•
Public Community Name: The community string to allow the SNMP manager to read the
wireless access point's MIB objects. The default is public.
wireless access point's MIB objects. The default is public.