Netgear WG302NA 사용자 설명서
Reference Manual for the NETGEAR ProSafe Wireless Access Point 802.11g WG302
Troubleshooting
6-3
July 2005 v3.0
I cannot connect to the WG302 to configure it.
Check these items:
•
The WG302 is properly installed, LAN connections are OK, and it is powered on. Check that
the LAN port LED is green to verify that the Ethernet connection is OK.
the LAN port LED is green to verify that the Ethernet connection is OK.
•
The default configuration of the WG302 is for a static IP address of 192.168.0.228 and a Mask
of 255.255.255.0 with DHCP disabled. Make sure your network configuration settings are
correct.
of 255.255.255.0 with DHCP disabled. Make sure your network configuration settings are
correct.
•
If you are using the NetBIOS name of the WG302 to connect, ensure that your computer and
the WG302 are on the same network segment or that there is a WINS server on your network.
the WG302 are on the same network segment or that there is a WINS server on your network.
•
If your computer is set to “Obtain an IP Address automatically” (DHCP client), restart it.
•
If your computer uses a Fixed (Static) IP address, ensure that it is using an IP Address in the
range of the WG302. The WG302 default IP Address is 192.168.0.228 and the default Subnet
Mask is 255.255.255.0. If you are not sure about these settings, follow the instructions for
range of the WG302. The WG302 default IP Address is 192.168.0.228 and the default Subnet
Mask is 255.255.255.0. If you are not sure about these settings, follow the instructions for
When I enter a URL or IP address I get a timeout error.
A number of things could be causing this. Try the following troubleshooting steps.
•
Check whether other PCs work. If they do, ensure that your PCs TCP/IP settings are correct. If
using a Fixed (Static) IP Address, check the Subnet Mask, Default Gateway, DNS, and IP
Addresses.
using a Fixed (Static) IP Address, check the Subnet Mask, Default Gateway, DNS, and IP
Addresses.
•
If the PCs are configured correctly, but still not working, ensure that the WG302 is connected
and turned on. Connect to it and check its settings. If you cannot connect to it, check the LAN
and power connections.
and turned on. Connect to it and check its settings. If you cannot connect to it, check the LAN
and power connections.
•
If the WG302 is configured correctly, check your Internet connection (DSL/Cable modem
etc.) to make sure that it is working correctly.
etc.) to make sure that it is working correctly.
•
Try again.