Netgear N450/CG3000Dv2 사용자 설명서

다운로드
페이지 88
Connecting to the Internet 
10
N450 WiFi Cable Modem Router Model N450/CG3000Dv2 
Label
The label on the modem router shows the router’s WiFi network name (SSID), password, 
serial number, and MAC address. 
Figure 4. Label
For information about the Restore Factory Settings button and the factory setting values, see 
Position Your Modem Router
The modem router lets you access your network anywhere within the operating range of your 
wireless network. However, the operating distance or range of your wireless connection can 
vary significantly depending on the physical placement of your modem router. For example, 
the thickness and number of walls the wireless signal passes through can limit the range. 
Additionally, other wireless access points in and around your home might affect your modem 
router’s signal. Wireless access points are modem routers, repeaters, WiFi range extenders, 
or any other device that emits a wireless signal for network access.
To position your modem router:
1. 
Place your modem router near the center of the area where your computers and other 
devices operate, and within line of sight to your wireless devices.
2. 
Make sure that the modem router is within reach of an AC power outlet and near Ethernet 
cables for wired computers.
3. 
Place the modem router in an elevated location, minimizing the number walls and ceilings 
between the modem router and your other devices.
4. 
Place the modem router away from electrical devices such as these:
Ceiling fans
MAC address
WiFi network name (SSID)
Serial number
Password (key)