Netgear WG602V4 사용자 설명서

Management

3-3

To view the Station List:

1. From under Management on the main menu of the browser interface, click Station List. The 

Status List screen will display. 

For each device, the table shows the MAC address and whether the device is allowed to 
communicate with the wireless access point or not. Note that if the wireless access point is 
rebooted, the table data is lost until the wireless access point rediscovers the devices. 

2. Click Refresh to force the wireless access point to look for associated devices.

Upgrade files can be downloaded from the NETGEAR Web site. If the upgrade file is compressed 
(.ZIP file), you must first extract the image (.TRX) file before uploading it to the wireless access 
point. The upgrade file can be sent using your browser. 

You cannot perform the firmware upgrade from a workstation connected to the WG602v4 via a 
wireless link. The firmware upgrade must be performed by a workstation connected to the 
WG602v4 through the Ethernet LAN interface.

Note: A wireless network can include multiple wireless access points, all using the 

same network name (SSID). This will extend the reach of the wireless network 
and allow users to roam from one access point to another, providing seamless 
network connectivity. However, only the stations associated with this wireless 
access point will be included in the Station List.

Note: The Web browser used to upload new firmware into the WG602v4 must support 

HTTP uploads, such as Microsoft Internet Explorer 5.0 or above, or Netscape 
Navigator 4.78 or above.