Netgear GS728TPP 사용자 설명서

In the Interface Ingress Rate Limit field, specify the ingress rate allowed. 

The range is 100–1000000 Kbps. The default value is 0, which means that the maximum 
is unlimited.

Click APPLY to apply the changes to the system. 

Queue Configuration

Use the Queue Configuration screen to define what a particular queue does by configuring 
switch egress queues. User-configurable parameters control the amount of bandwidth used 
by the queue and the scheduling of packet transmission from the set of all queues on a port. 
The CoS queue configuration is global.

You can configure four queues as strict priority or weighted round robin (WRR) priority. If a 
specific queue is configured as WRR, all the queues with a lower number are also WRR 
queues. The configuration is global and not per port.



Select QoS 



 CoS 



 Advanced 



 Queue Configuration.

The following screen displays:

 

Select the check box next to the port or LAG to configure. 

You can select multiple ports and LAGs to apply the same setting to the selected 
interfaces. Select the check box in the heading row to apply a trust mode or rate to all 
interfaces.

Configure any of the following settings:

Queue ID. Select the queue to be configured.

Minimum Bandwidth. Enter a value in the range 1–100 that reflects the relative 
bandwidth of this queue. The bandwidth allocation per queue is the configured weight