Netgear GS728TPP 사용자 설명서
257
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
•
Destination MAC. 01:02:1A:BC:DE:EF
•
Destination MAC Mask. 00:00:00:00:FF:FF
•
Source MAC. 02:02:1A:BC:DE:EF
•
Source MAC Mask. 00:00:00:00:FF:FF
•
VLAN ID. 2
For more information about MAC ACL rules, see
3.
In the MAC Binding Configuration screen, assign the Sales_ACL to Ethernet ports 6, 7, and
8 and click APPLY.
You can assign an optional sequence number to indicate the order of this access list
relative to other access lists if any are already assigned to this interface and direction.
relative to other access lists if any are already assigned to this interface and direction.
4.
The MAC Binding Table displays the interface and MAC ACL binding information.
The ACL named Sales_ACL looks for Ethernet frames with destination and source MAC
addresses and MAC masks defined in the rule. Also, the frame must be tagged with
VLAN
addresses and MAC masks defined in the rule. Also, the frame must be tagged with
VLAN
ID 2, which is the Sales department VLAN. The CoS value of the frame must be 0,
which is the default value for Ethernet frames. Frames that match this criteria are permitted
on interfaces 6, 7, and 8 and are assigned to the hardware egress queue 0, which is the
default queue. All other traffic is explicitly denied on these interfaces. To allow more traffic to
enter these ports, you must add a permit rule with the desired match criteria and bind the rule
to interfaces 6, 7, and 8.
on interfaces 6, 7, and 8 and are assigned to the hardware egress queue 0, which is the
default queue. All other traffic is explicitly denied on these interfaces. To allow more traffic to
enter these ports, you must add a permit rule with the desired match criteria and bind the rule
to interfaces 6, 7, and 8.
Sample Standard IP ACL Configuration
The following example shows how to create an IP-based ACL that prevents any IP traffic
from the Finance department from being allowed on the ports that are associated with other
from the Finance department from being allowed on the ports that are associated with other