Netgear GS728TPP 사용자 설명서
59
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
has the VLAN ID, priority, DSCP, tagged bit status, and unknown bit status. This
information is displayed only if a network policy TLV has been transmitted.
information is displayed only if a network policy TLV has been transmitted.
•
VLAN ID. The VLAN ID associated with the policy.
•
VLAN Type. Specifies whether the VLAN associated with the policy is tagged or
untagged.
untagged.
•
User Priority. The priority associated with the policy.
•
DSCP. The DSCP associated with a particular policy type.
LLDP-MED Port Settings
Use this screen to enable LLDP-MED mode on an interface and configure its properties.
To configure LLDP-MED settings for a port:
1.
Select System
LLDP
Advanced
LLDP-MED Port Settings.
The following screen displays:
2.
From the Port list, select the port to configure.
3.
From the LLDP-MED Status list, enable or disable the LLDP-MED mode for the selected
interface.
4.
From the Notification list, select Enable or Disable to specify whether the port must send
a topology change notification if a device is connected or removed.
5.
From the Transmit Optional TLVs list, select Enable or Disable to specify whether the port
must transmit optional type length values (TLVs) in the LLDP PDU frames.
If enabled, the following LLDP-MED TLVs are transmitted:
•
MED Capabilities