Netgear WG302 사용자 설명서

3-2

Basic Installation and Configuration

For best results, place your wireless access point:

•

Near the center of the area in which your PCs will operate.

•

In an elevated location such as a high shelf where the wirelessly connected PCs have 
line-of-sight access (even if through walls).

•

Away from sources of interference, such as PCs, microwaves, and 2.4 GHz cordless phones.

•

Away from large metal surfaces.

•

Putting the antenna in a vertical position provides best side-to-side coverage. Putting the 
antenna in a horizontal position provides best up-and-down coverage. 

•

If using multiple access points, it is better if adjacent access points use different 

radio frequency 

Channels to reduce interference. The recommended Channel spacing between adjacent access 
points is 5 Channels (for example, use Channels 1 and 6, or 6 and 11).

The time it takes to establish a wireless connection can vary depending on both your security 
settings and placement. WEP connections can take slightly longer to establish. Also, WEP 
encryption can consume more battery power on a notebook computer.

The WG302 Access Point connects to your LAN via twisted-pair Category 5 Ethernet cable with 
RJ-45 connectors.

Failure to follow these guidelines can result in significant performance 

degradation or inability to wirelessly connect to the WG302. For complete performance 
specifications, see