Netgear DGND3300 사용자 설명서

4-8

Using Network Monitoring Tools

•

To change the polling frequency, enter a time in seconds in the Poll Interval field, and click 
Set Interval.

•

To stop the polling, click Stop.

The Attached Devices table lists all IP devices that the modem router has discovered on the local 
network. From the main menu, under Maintenance, select Attached Devices to view the table. 

For each device, the table shows the IP address, NetBIOS host name or device name (if available), 
and the Ethernet MAC address. To force the modem router to look for attached devices, click 
Refresh.

Status

The link status of the port.

TxPkts

The number of packets transmitted on this port since reset or manual clear.

RxPkts

The number of packets received on this port since reset or manual clear.

Collisions

The number of collisions on this port since reset or manual clear.

Tx B/s

The current transmission (outbound) bandwidth used on the WAN and LAN ports.

Rx B/s

The current reception (inbound) bandwidth used on the WAN and LAN ports.

Up Time

The time elapsed since this port acquired the link.

Poll Interval

The intervals at which the statistics are updated in this screen. 

Note: If the router is rebooted, the table data is lost until the modem router rediscovers 

the devices.