Netgear DGND3300 사용자 설명서
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual
5-4
Customizing Your Network Settings
v1.0, March 2009
Using the Modem Router as a DHCP Server
By default, the modem router functions as a DHCP server, allowing it to assign IP, DNS server,
and default gateway addresses to all computers connected to the modem router’s LAN. The
assigned default gateway address is the LAN address of the modem router. The modem router
assigns IP addresses to the attached computers from a pool of addresses specified in this screen.
Each pool address is tested before it is assigned to avoid duplicate addresses on the LAN.
and default gateway addresses to all computers connected to the modem router’s LAN. The
assigned default gateway address is the LAN address of the modem router. The modem router
assigns IP addresses to the attached computers from a pool of addresses specified in this screen.
Each pool address is tested before it is assigned to avoid duplicate addresses on the LAN.
For most applications, the default DHCP and TCP/IP settings of the modem router are satisfactory.
Click the link to the online document
Click the link to the online document
for an
explanation of DHCP and information about how to assign IP addresses for your network.
Specify the pool of IP addresses to be assigned by setting the starting IP address and ending IP
address. These addresses should be part of the same IP address subnet as the modem router’s LAN
IP address. Using the default addressing scheme, you should define a range between 192.168.0.2
and 192.168.0.254, although you might wish to save part of the range for devices with fixed
addresses.
address. These addresses should be part of the same IP address subnet as the modem router’s LAN
IP address. Using the default addressing scheme, you should define a range between 192.168.0.2
and 192.168.0.254, although you might wish to save part of the range for devices with fixed
addresses.
The modem router delivers the following parameters to any LAN device that requests DHCP:
•
An IP Address from the range you have defined
•
Subnet Mask
•
Gateway IP Address (the modem router’s LAN IP address)
•
Primary DNS Server (if you entered a primary DNS address in the Basic Settings screen;
otherwise, the modem router’s LAN IP address)
otherwise, the modem router’s LAN IP address)
•
Secondary DNS Server (if you entered a secondary DNS address in the Basic Settings screen)
To use another device on your network as the DHCP server, or to manually configure the network
settings of all of your computers, clear the Use Router as DHCP Server check box. Otherwise,
leave it selected. If this service is not selected and no other DHCP server is available on your
network, you will need to set your computers’ IP addresses manually or they will not be able to
access the modem router.
settings of all of your computers, clear the Use Router as DHCP Server check box. Otherwise,
leave it selected. If this service is not selected and no other DHCP server is available on your
network, you will need to set your computers’ IP addresses manually or they will not be able to
access the modem router.
Address Reservation
When you specify a reserved IP address for a computer on the LAN, that computer always
receives the same IP address each time it accesses the modem router’s DHCP server. Reserved IP
addresses should be assigned to computers or servers that require permanent IP settings.
receives the same IP address each time it accesses the modem router’s DHCP server. Reserved IP
addresses should be assigned to computers or servers that require permanent IP settings.
To reserve an IP address:
1. Click Add.