Netgear WNR854T 전단

)NSTALLATION

Please refer to the link on your CD to the full online Reference Manual for instructions on 
advanced configuration options. 

•

For Cable Modem Service: When you set up the wireless router, be sure to use the 
computer you first registered with your cable modem service provider.

•

For DSL Service: You may need information such as the DSL login name and 
password in order to complete the wireless router setup.

a.

Turn off and unplug your cable or DSL modem.

b.

Turn off your computer.

c.

At the computer end 
only, disconnect the 
Ethernet cable (point 1 
in the illustration) that 
connects your computer 
to the cable or DSL 
modem.

,QWHUQHW

d.

Securely insert the Ethernet 
cable from your modem into the 
Internet port of the wireless 
router (2).

e.

Next, securely insert the Ethernet cable (3) that came with your wireless router 
into a LAN port on the router such as LAN port 1 (4), and the other end into the 
Ethernet port of your computer (5).

Your network cables are now connected and you are ready to start your network.

Warning: Failure to restart your network in the correct sequence could prevent you 
from connecting to the Internet.

a.

First, plug in and turn on the cable or DSL modem.Wait about 2 minutes.

b.

Now, plug in the power cord to your WNR854T and wait about 30 seconds. 

c.

Last, turn on your computer. 
Note: For DSL customers, if ISP-provided software logs you in to the Internet, 
do not run that software. You may need to go to the Internet Explorer® Tools 
menu, Internet Options, Connections tab page where you can select the “Never 
dial a connection” radio button and click Apply.

)NTERNET

)NTERNET

d.

According to the label on your wireless router, check the status lights and verify 
the following:

•

Power: The power light should be lit. If not, see the Troubleshooting Tips in 
this guide.

•

Internet: The Internet light should be lit. If not, make sure the Ethernet cable 
is securely attached to the wireless router Internet port and the powered on 
modem.

•

Wireless: The wireless light should be lit. If not, see the Troubleshooting 
Tips in this guide.

•

LAN: A LAN light should be lit. 

Configure the WNR854T for Internet access and wireless connectivity.
Configure Internet Access

1.

Connect to the wireless router by typing http://192.168.1.1 in the address field of 
your browser, then click Enter.

2.

For security reasons, the 
router has its own user name 
and password. 

A login window like the one 
shown below opens.

When prompted, enter 
admin

 for the router user 

name and password for 
the router password, both in 
lower case letters. The 
wireless router will display its home page.

3.

Configure the wireless router to use the settings your Internet service provider gave 
you. If you cannot find these settings, contact settings your Internet service provider. 

Follow the instructions in the NETGEAR wireless router online help screens or in the 
Setup Manual on the NETGEAR CD to complete the configuration of your wireless 
router for Internet access. 

4.

Click Apply, then Test to verify that you have Internet connectivity.