Netgear WNR834B 사용자 설명서

6-10

Using Network Monitoring Tools

If the router discovers a newer version of software, the message on the left will appear when you 
log in. If no new firmware is available, the message on the right will appear.

To automatically upgrade to the new software, click Yes to allow the router to download and install 
the new software file from NETGEAR.

When the upload is complete, your router will automatically restart. The upgrade process typically 
takes about one minute. Read the new software release notes to determine whether you must 
reconfigure the router after upgrading.

To manually select, download, and install new software to your router, follow these steps:

1. Under the Maintenance menu on your router interface, select Router Status. Note the version 

number of your router firmware.

2. Go to the WNR834B support page on the NETGEAR website at

3. Check the most recent firmware version offered against the firmware version shown on your 

Router Status menu.

4. If the version on the NETGEAR website is more recent, download the file to your computer.

5. Under the Maintenance menu on your router interface, select Router Upgrade.

6. Click Browse and locate the firmware image that you downloaded to your PC (the file will end 

in .img or .chk). 

Warning: When uploading software to the WNR834B router, do not interrupt the Web 

browser by closing the window, clicking a link, or loading a new page. If the 
browser is interrupted, it could corrupt the software.