Netgear WNR834B 사용자 설명서

4-2

Customizing Your Network Settings

.

The router is shipped preconfigured to use private IP addresses on the LAN side and to act as a 
DHCP server. The router’s default LAN IP configuration is:

•

LAN IP address: 192.168.1.1

•

Subnet mask: 255.255.255.0

These addresses are part of the designated private address range for use in private networks, and 
should be suitable for most applications. If your network has a requirement to use a different IP 
addressing scheme, you can make those changes in this menu.

The LAN IP parameters are:

•

IP Address. The LAN IP address of the router.

•

IP Subnet Mask. The LAN Subnet Mask of the router. Combined with the IP address, the IP 
Subnet Mask allows a device to know which other addresses are local to it, and which must be 
reached through a gateway or router.

•

RIP Direction. RIP allows a router to exchange routing information with other routers. The 
RIP Direction selection controls how the router sends and receives RIP packets. Both is the 
default. 

–

When set to Both or Out Only, the router broadcasts its routing table periodically.